Quantifying the Demand Response Potential of Residential Loads in India

Siddhant Vibhute

Indian Institute of Technology Bombay, Mumbai, India

Deepti Shakya

Indian Institute of Technology Bombay, Mumbai, India

Anupama Kowli

Indian Institute of Technology Bombay, Mumbai, India
Corresponding Author: anu.kowli@iitb.ac.in

Cite this article

Vibhute, S., Shakya, D., Kowli, A. (2024). Quantifying the Demand Response Potential of Residential Loads in India. In Proceedings of Energise 2023- Lifestyle, Energy Efficiency, and Climate Action, pp 163–172, Alliance for an Energy Efficient Economy. https://doi.org/10.62576/XEDC4346

Highlights

  • Smart meter data from residences in Pune City is analyzed for estimating urban residential load in India.
  • Appliance ownership data is exploited to infer electricity usage and peaks in the load curve for each household.
  • Potential of demand response (DR) programs is studied using this data set to shave peaks by load shifting.
  • Load composition of residences contributing to system peak is studied to estimate their DR potential.

Abstract

The paper investigates how residential loads in India contribute to grid peak load and how to manage such peaks. Algorithms that process smart meter data from residential loads and compute attributes that capture their contribution to the system peak are devised and demonstrated in the paper. Specifically, a distribution system is considered based on a study on households in Pune, India. To enhance the household dataset for analysis, a synthetic data generation technique is employed. The algorithms developed here are applied to this system to showcase their capabilities. Results show how simple attributes such as peak amplitude and peak duration can extract sufficient information to ensure households that contribute to system peak are appropriately identified. Moreover, these attributes offer insights into appliance ownership, supporting the development of effective DR programs. A demonstration of how shifting of individual peaks can significantly impact system peak is also provided. The results lay the foundation for designing meaningful DR programs leveraging the smart meter data.

Keywords

Demand Response, Residential Loads, Peak Load Shaving, Load Shifting

References

  1. A. Chunekar and A. Sreenivas, “Towards an understanding of residential electricity consumption in India,” Building Research & Information, vol. 47, no. 1, pp. 75-90, 2019. https://doi.org/10.1080/09613218.2018.1489476
  2. C. Sasidharan, I. Bhand, V. B. Rajah, V. Ganti, S. Kumar, S. C. Sachar, S. Chaurasia, L. Goel, A. Gujral, V. Singh, and G. Srinivasan, “Roadmap for demand flexibility in India”, 2022.
  3. T. Ericson, “Direct load control of residential water heaters,” Energy Policy, vol. 37, no. 9, pp. 3502-3512, 2009. https://doi.org/10.1016/j.enpol.2009.03.063
  4. A. Faruqui and S. Sergici, “Household response to dynamic pricing of electricity-a survey of the empirical evidence,” Available at SSRN 1134132, 2010. https://doi.org/10.2139/ssrn.1134132
  5. A. C. Duman, O. G ¨ on¨ ul, H. S. Erden, and ¨ O. G ¨ uler, “Survey-and simulation-based analysis of residential demand response: Appliance use behavior, ¨ electricity tariffs, home energy management systems,” Sustainable Cities and Society, p. 104628, 2023. https://doi.org/10.1016/j.scs.2023.104628
  6. A. Srivastava, S. Van Passel, and E. Laes, “Assessing the success of electricity demand response programs: A meta-analysis,” Energy research & social science, vol. 40, pp. 110-117, 2018. https://doi.org/10.1016/j.erss.2017.12.005
  7. C. Goldman, N. Hopper, R. Bharvirkar, B. Neenan, and P. Cappers, “Estimating demand response market potential among large commercial and industrial customers: a scoping study,” 2007. https://doi.org/10.2172/901520
  8. M. Ali, A. Safdarian, and M. Lehtonen, “Demand response potential of residential hvac loads considering users preferences,” in IEEE PES innovative smart grid technologies, Europe. IEEE, 2014, pp. 1-6. https://doi.org/10.1109/ISGTEurope.2014.7028883
  9. B. J. Johnson, M. R. Starke, O. A. Abdelaziz, R. K. Jackson, and L. M. Tolbert, “A dynamic simulation tool for estimating demand response potential from residential loads,” in 2015 IEEE Power & Energy Society Innovative Smart Grid Technologies Conference (ISGT). IEEE, 2015, pp. 1-5. https://doi.org/10.1109/ISGT.2015.7131867
  10. M. E. Dyson, S. D. Borgeson, M. D. Tabone, and D. S. Callaway, “Using smart meter data to estimate demand response potential, with application to solar energy integration,” Energy Policy, vol. 73, pp. 607-619, 2014. https://doi.org/10.1016/j.enpol.2014.05.053
  11. Prayas Energy Group, “Household energy consumption data: Processed data,” 2021, Harvard Dataverse. [Online]. Available: https://doi.org/10.7910/DVN/YJ5SP1
  12. Huang, Guilin. “Missing data filling method based on linear interpolation and lightgbm.” In Journal of Physics: Conference Series, vol. 1754, no. 1, p. 012187. IOP Publishing, 2021. https://doi.org/10.1088/1742-6596/1754/1/012187
  13. Yuan, Rui, et al. “A synthetic dataset of Danish residential electricity prosumers.” Scientific Data 10.1 (2023): 371. https://doi.org/10.1038/s41597-023-02271-3
  14. P. Du, N. Lu, and H. Zhong, Demand response in smart grids Springer, 2019, vol. 262. https://doi.org/10.1007/978-3-030-19769-8
  15. “Power consumption of typical household appliances.” [Online]. Available: https://simpleghar.com/household-appliances-power-consumption/
  16. A. Poulin, M. Dostie, M. Fournier, and S. Sansregret, “Load duration curve: A tool for technico-economic analysis of energy solutions,” Energy and buildings, vol. 40, no. 1, pp. 29-35, 2008. https://doi.org/10.1016/j.enbuild.2007.01.020